Mainstring IDC Gel Connectors

‘Keeping You Connected’
MS Mainstring Company is a leading manufacturer and exporter of splicing connectors from Tainan, Taiwan. The company was founded in 1979 and has since established a reputation for providing excellent quality, on-time deliveries and friendly service in the splicing connectors industry.

It’s important to note that approximately 50% of Mainstring sales are purchased directly by the Taiwanese Government Chun-Hue Telecom Company. This more than verifies the reputation of MS Mainstring Company and its products over a long and established background covering 27 plus years.
Wingrove-Mainstring-Brochure


MS-UR2 Connector      For General Butt Splicing

UR2This gel-filled moisture-resistant UR2 insulation butt connector (Red lid) which is self-striping was designed to be used for either two or three-wire connections.  It consists of three ports which allow it to be used for straight and bridge slicing.
The UR2 connection will accept two or three-wire combinations of 19 (0.9mm) through 26 (0.4mm) AWG air core 19 (0.9mm) through 26 (0.4mm) AWG filled cable with a maximum insulation O.D. of 2.08mm

Download Brochure on MS-UR2 Connectors


MS-UR Connector      For General Butt Splicing

UR2This gel-filled moisture-resistant UR insulation butt connector (Red lid) which is self-striping was designed to be used for either two or three-wire connections.  It consists of three ports which allow it to be used for straight and bridge slicing.
The UR connection will accept two or three-wire combinations of 19 (0.9mm) through 26 (0.4mm) PIC-unfilled and PIC-filled with a maximum insulation O.D. of 1.52 mm.

Download Brochure on MS-UR Connectors


MS-UY2 Connector       For General Butt Splicing

This gel-filled moisture-resistant UY2 insulation butt connector (Yellow lid), which is self-stripping, is a small two-wire version of the UR2 (Red lid).  Its small size allows you to handle higher pair count splicing whilst keeping the bundle O.D. to a minimum.
The UY2 accepts any two-wire combinations of 19 (0.9mm) through 26 (0.4mm) AWG filled or air core cable with a maximum insulation O.D. of 2.08 mm.

Download Brochure on MS-UY2 Connectors


 

MS-UY Connector       For General Butt Splicing

This gel-filled moisture-resistant UY2 insulation butt connector (Yellow lid), which is self-stripping, is a small two-wire version of the UR2 (Red lid).  Its small size allows you to handle higher pair count splicing whilst keeping the bundle O.D. to a minimum.
The UY accepts any two-wire combinations of 22 (0.6mm) through 26 (0.4mm) AWG filled or air core cable with a maximum insulation O.D. of 1.52 mm.

Download Brochure on MS-UY Connectors


 

 

MS-UB Connector     The Ergonomic Tap Splice Connector

This gel-filled moisture-resistant UB tap splice connector (Blue lid), features space-saving design.  Its pre-crimp feature allows the electrical contractors to position the UB and snap it into place with their fingers prior to final crimping.  The pre-crimp prevents the possibility of the wire slipping out of the connector before the tool crimp is made, lending itself to be a more effective and efficient splicing connector.

The UB also allows the user to tap directly into an existing wire without interrupting service.  In ready access closures, the UB eliminates cutting cable pairs, open ends and piecing out wires. The UB accepts 22 (0.6mm) through 26 (0.4mm) AWG paper, pulp and PIC air core or 24 (0.5mm) through 26 (0.4mm) AWG PIC filled core cable.

Download Brochure on MS-UB Connectors


MS-Crimping Tool

The crimping tool is small, lightweight, easy-to-handle and economical.  This tool has stepped jaws which provide a nearly parallel crimping action at time of connection.  The crimping tool also features side wire cutting and insulated handles.  It is designed for use with UR, UB and UY connectors.

 

Website supported by: Australia Marketing and Digital Marketing Sydney.